Welcome To our Paranormal Electronics Ltd exclusive range Para-Beacon range
The Para-Beacon range is a brand new range designed and manufactured exclusively by ourselves to give a range of different sensor types within the same design.
The sensor itself is printed on our very own 3D printers and is taking the step towards the next generation of innovations within the Ghost Hunting Equipment field. Each sensor will detect different changes whether you are wishing to detect Temperature fluctuations, Vibration, Touch (REM), sound/Audio or movement then this range is definitely the best you can purchase.
As all our manufactured products we make them very robust because we understand that not everyone can be delicate with equipment especially during the journeys to and from a location, we test all items to destruction so all our designs can cope with all the usual knocks and bangs that equipment goes through.
The Main function of each sensor is to show an activation with both light and sound, each Para-Beacon with have super bright lights illuminated on activation with a buzzer sound to bring your attention to the activation.
Most of our products are powered by internal battery packs and these are no exception, With the internal battery you will only need to charge this up with the micro usb cable provided. On a full charge with constant use the battery will last at least 2-3 months without needing a charge
Temperature and Vibration
The Temperature and Vibration Para-Beacon has both elements built into the one sensor.
What does it do?
Top - RED
The top of the sensor will light up red when the sensor detects a rise in temperature and illuminate the entire top section and continue until the temperature has reduced.
Middle - GREEN
When the Para-Beacon detects a vibration near a Green light will light up the entire middle section and change to the intensity that the vibration has been detected. This has its own independent buzzer at a different tone that will also active.
Bottom - BLUE
The bottom section of the Para-Beacon will light up blue when the temperature drops with the buzzer activating also. This will continue to activate until the temperature returns to within the normal range.
It is possible to get a multi activation as all sensors are independent so the vibration can be detected as well as a temperature change. This will help with increasing the different anomalies that can happen at one time.